The SW1 smart switch is connected to the Internet via WiFi wireless network, you can control the switch from anywhere with a network connection through your smartphone, and check the on/off status of the switch. You can control any
How to insert electrical equipment into this switch, such as desk lamps, corridor lamps, living room lamps, etc., the switch has a timing function and an appointment function.
SW1 smart socket supports Amazon ECHO, Google Home and other voice speakers, and can control the switch status through language.
2.4 Operation steps
A. One-click configuration
1. Please connect the mini socket to the power supply and wait for the indicator light to flash quickly, or press and hold the power button for 9 seconds until the indicator light flashes fast (2 times per second).
2. Connect the phone to wifi and confirm success.
3. Open the APP, click the add icon in the upper right corner of the device list, and select "socket" to enter the configuration device interface.
4. Click "Please confirm that the indicator light is flashing quickly", enter the password of the WIFI currently connected to the mobile phone, and click "Confirm".
5. Wait for the configuration. After the configuration is successful, click "Finish" to jump to the function interface of the socket.
B. AP configuration
AP configuration is an auxiliary configuration method. If one-key configuration fails, AP configuration can be used. Methods as below:
1. Press and hold the power button for 9 seconds, the indicator light will flash slowly (on for 2 seconds and off for 2 seconds).
2. Open the APP, click the add icon in the upper right corner of the device list, select "socket" to enter the configuration device interface, click on the upper right corner
"Compatibility Mode" to enter the AP configuration interface.
3. Click "Please confirm that the indicator light is flashing slowly", enter the password of the WIFI currently connected to the mobile phone, and click "Confirm".
4. Click "Connect", it will jump to the WIFI list interface, select SmartLife-XXXX and click "Connect".
5. Click the return button on the mobile phone, wait for the configuration, and click "Finish" after the configuration is successful to jump to the function interface of the socket.
3. Warnings and Precautions
1. The plug must be fully inserted into the wall socket.
2. Do not insert conductors or other tools into the jacks.
3. During operation, if there is radio frequency interference, the socket may not work.
4. It can only be used indoors.
5. Please use it in a dry place, not in a wet place such as the bathroom.
6. Please ensure the safety of electricity use, and the resistive load current cannot be higher than 10A.
7. Keep it out of reach of children.
undefined
The SW1 smart switch is connected to the Internet via WiFi wireless network, you can control the switch from anywhere with a network connection through your smartphone, and check the on/off status of the switch. You can control any
){kind=link}
){kind=link}