Knx Tuya Home Smart Central Control Panel 4 Inch LCD Screen Touch Panel with Wireless

• Customization: Available
• Type: Quad
• Certification: CE
• Model NO.: T6ES
• Operation: Remote ON / OFF
• Transport Package: Carton
• Specification: LCD
• Trademark: DUKEWE
• Origin: Shenzhen, China
• HS Code: 8537109090
• Production Capacity: 100000
• Package Size: 50.00cm * 45.00cm * 35.00cm
• Package Gross Weight: 3.000kg
• Lead Time: 15 days (1 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

S6K(KNX)
4 "control panel product specification

1. This version is updated

VER.	UPDATED		Time
V1.0	initial version		2024-06-17
V2.0	Updated description of KNX wiring diagram.		2024-06-24
V3.0	Updated POE power supply description and product weight.		2024-09-11

 

 

.product introduction

1.1 appearance

1.2 product function

1. 4 inch LCD, 2.5D full screen, dual array microphone noise reduction, light distance sensing, 1W speaker.
2. Universal 86 panel size, into the wall type hidden installation, easy installation, no need to transform the wall.
3. KNX bus control, can realize the switch, light, curtain, air conditioning, fan, and other intelligent equipment control.
4. Smart home interconnection, customize the scene mode, touch the panel or voice wake up, you can quickly switch the scene mode.
5.  Supports one-click disable to prevent user privacy disclosure.

 

Chapter 2 -Product parameters and key dimensions

2.1 Parameter spcification

function	parameter
CPU	PX30 Quad-Core Cortex-A35
RAM	2G,LPDDR4
ROM	8G,eMMC
screen	4 inch 480P,2.5Dtouch panel
system	Android 11
microphone	Two-wheat linear array
Speaker	8 OU 1W,BOX tune trope
ASR	iFlyTek
BT	BT 5.4,BLE5.4
sensor	50CM Distance sensor, light sensor
Cable Network	100M Network, PoE power supply (optional)
Wi-Fi	2.4&5GHz,802.11a/b/g/n/ac/ax
KNX control	Number of supported scenarios	20
	Number of supported devices	52
	Device type and quantity	SWITCH:10,dimming :8,colour temperature adjusting:8, RGB: 6,Curtain:8,air conditioner:6,underfloor heating:3,new trend:3
working voltage	24V DC(9V-36V)
Work Temperature	0ºC~40ºC
Storage Temp	-20ºC~60ºC
operating humidity	≤90% RH
Net.weight	873g
Product Size	86x86x10.5mm (Not including base)   86x86x39.5mm (including base)

2.2 key dimensions

 

3.interface specification

 3.1 interface specification

 

3.2 KNX schematic diagram

1. The red and black terminals are KNX bus interfaces, and the yellow and white terminals are auxiliary power supply interfaces
2. Black: KNX -, red: KNX +; White: GND, yellow: DC 24V input.
3. The network port is an RJ45 standard network port and supports POE power supply.

 

 

4.Installation illustrations and instructions

4.1 Installation Instruction

 

4.2 installation instructions

1. Remove the support and bottom case using a flat-head screwdriver, and install them in the cassette.
2. l Check that the KNX cable and the power cable are in good contact with the wiring terminals of the bottom box and do not fall off.
3. l Use the mounting screws of the accessory kit to secure the support base to the cassette. Ensure that the support is flush with the wall, and gently press to close the panel.
4. l When installing the support, do not tighten the screws too tightly; otherwise, the support may be deformed or the screen or hardware may be damaged.
5. l If there is a problem in the installation, do not forcibly press the installation, should first level the wall, check the flatness of the support.

 

5. product description

5.1 safety instruction

l To ensure proper use of this product, it must be installed or disassembled by a professional electrician.

l The main power switch must be turned off before installing or removing the product to prevent electric shock.

l Keep the product away from fire and water sources during installation and use.

l This product should not be used in humid environments (such as bathrooms).

l The POE port and KNX auxiliary power port cannot supply power at the same time.