Knx Tuya Home Smart Central Control Panel 6 Inch LCD Screen Touch Panel with Wireless

• Customization: Available
• Type: Quad
• Certification: CE
• Model NO.: S8K
• Operation: Remote ON / OFF
• Transport Package: Carton
• Specification: LCD
• Trademark: DUKEWE
• Origin: Shenzhen, China
• HS Code: 8537109090
• Production Capacity: 100000
• Package Size: 50.00cm * 45.00cm * 35.00cm
• Package Gross Weight: 3.000kg
• Lead Time: 15 days (1 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

1.product introduction

1.1 Product appearance

1.2 Product function

1. 6 "+1.2" LCD, four array microphone noise reduction, light, distance, temperature and humidity sensing, 2*1W speaker.
2.  Universal type 86 into the wall type hidden installation, easy installation, no need to transform the wall.
3. KNX bus control, can realize the switch, light, curtain, air conditioning, fan, and other intelligent equipment control.
4.  Smart home interconnection, customize the scene mode, touch the panel or voice wake up, you can quickly switch the scene mode..

2.Product parameters and key dimensions

2.1 Parameter specification

Feature	Parameter specification
CPU	PX30 Quad-Core  Cortex-A35
RAM	2G,LPDDR4
ROM	8G,eMMC
Screen	6 inch 720P,1.22 inch Knob panel
System	Android 11
microphone	Four wheat linear array
Loud speaker	8Ω1W*2,BOX Tone cavity
Speech recognition	IFlytek
Bluetooth	BT4.2
sensor	50CM Distance sensor, light sensor, temperature and humidity sensor
key	Knob, reset button
port	Micro USB
Wired network	100M Network, PoE power supply (optional)
WIFI	2.4GHz,802.11b/g/n
KNX Control	Number of supported scenarios	20
	Number of supported devices	52
	Device type and quantity	Switch: 10, Dimming: 8, color temperature: 8, RGB: 6, curtain: 8, air conditioning: 6, floor heating: 3, fresh air: 3
Operating voltage	24V DC(24V-30V)
Operating temperature	0ºC~40ºC
Storage temperature	-20ºC~60ºC
Working humidity	≤90% RH
Net weight	1470g
Product size	205.6x85.6x10mm (excluding base)   205.6x85.6x53.6mm (including base)

2.2 Critical dimension

 

3.Interface description

 3.1 Interface description

 

3.2 KNX Wiring diagram

 

1. l The red and black terminals are KNX bus ports, and the yellow and white terminals are auxiliary power supply ports.
2. l Black: KNX -, red: KNX +;
3. White: GND, yellow: DC 24V input.
4. The l network port is an RJ45 standard network port and supports POE power supply.

 

 

4.Installation illustrations and instructions

4.1 Installation diagram

 

4.2 Installation instructions

1. l Remove the support and bottom case using a flat-head screwdriver, and install them in the cassette.
2. l Check that the KNX cable and the power cable are in good contact with the wiring terminals of the bottom box and do not fall off.
3. l Use the mounting screws of the accessory kit to secure the support base to the cassette. Ensure that the support is flush with the wall, and gently press to close the panel.
4. l When installing the support, do not tighten the screws too tightly; otherwise, the support may be deformed or the screen or hardware may be damaged.
5. l If there is a problem in the installation, do not forcibly press the installation, should first level the wall, check the flatness of the support.

 

5.Product instructions

5.1 Safety notice

1. l To ensure proper use of this product, it must be installed or disassembled by a professional electrician.
2. l The main power switch must be turned off before installing or removing the product to prevent electric shock.
3. l Keep the product away from fire and water sources during installation and use.
4. l This product should not be used in humid environments (such as bathrooms).
5. l The POE port and KNX auxiliary power port cannot supply power at the same time.