**Chapter 1 Product Introduction**
1.1 Product Appearance
1.2 Product Features- 4-inch LCD, 2.5D full screen, dual array microphone noise cancellation, light distance sensing, 1W speaker.
- Universal 8-type panel size, flush-mounted installation, easy installation, no need to modify the wall.
- KNX bus control, can control smart devices such as switches,, curtains, air conditioners, and fans.
- Interconnection with smart homes, customizable scene modes, quick switching of scene modes by touching the panel or voice-up.
- Supports one-key mute function to prevent user privacy leakage.
**Chapter 2 Product Parameters and Key Dimensions**
2.1 Parameter Specifications
- CPU PX30 quad-core Cortex-A35
- RAM: 2G, LPDDR4
- ROM: 8G, eMMC
-: 4-inch 480P, 2.5D touch screen
- System: Android 11
- Microphone: Dual linear
- Speaker: 8 ohm 1W, BOX sound chamber
- Voice Recognition: iFLYTEK
- Bluetooth: BT 5.4 BLE5.4
- Sensors: 50CM distance sensor, light sensor
- Wired Network: 100M network, supports PoE supply (optional)
- Wireless Network: 2.4&5GHz, 802.11a/b/g/n/ac/ax
-X Control:
- Supported Scenes: 20
- Supported Devices: 52
- Types and Quantities of Devices: Switches 10, Dimmers: 8, Color Temperature Adjusters: 8, RGB: 6, Curtains: 8, Air Conditioners 6, Underfloor Heating: 3, Fresh Air: 3
- Operating Voltage: 24V DC (9V-36V- Operating Temperature: 0ºC~40ºC
- Storage Temperature: -20ºC~60ºC
- Operating Humidity: ≤90 RH
- Product Net Weight: 873g
- Product Dimensions: 86x86x10.5mm (excluding base 86x86x39.5mm (including base)
2.2 Key Dimensions
**Chapter 3 Interface Description**
3.1 Description
3.2 KNX Wiring Diagram
- Red and black terminals are KNX bus interfaces, yellow and white terminals are auxiliary power supply interfaces.
-: KNX -, Red: KNX ; White: GND, Yellow: DC 24V input.
- The network port is a standard RJ4 port, supports POE power supply.
**Chapter 4 Installation Diagram and Description**
4.1 Installation Diagram
4.2 Installation Description
- Use ahead screwdriver to remove the product bracket and base box, and install it in the recessed box.
- Check the wiring to ensure that the KNX cable power cable are in good contact with the base box terminals and will not fall off.
- Use the installation screws in the accessory package to secure the bracket base to recessed box, ensuring that the bracket is flush with the wall, then gently press the panel to fit.
- Note that during the installation of the bracket, installation screws should not be tightened too much to avoid deformation of the bracket or damage to the screen and hardware.
- If there are any problems during installation, do force the installation by pressing hard, but first level the wall and check the flatness of the bracket.
**Chapter 5 Product User Manual**
5.1 Instructions
- To ensure the correct use of this product, this product must be installed or removed by a professional electrician.
- The main power switch must be off before installing or removing this product to prevent electric shock.
- This product should be kept away from fire and water sources during installation and use.
- This product be used in humid environments (such as bathrooms).
- The POE network port and KNX auxiliary power interface cannot be powered at the same time.
5. Product KNX Configuration Usage Instructions*** To be updated
Audited Supplier 
){kind=link}